Wlrlib User Library; Winulib User Library - Keithley 4200A-SCS Reference Manual

Model 4200A-SCS Parameter Analyzer Reference Manual

wlrlib user library

The user modules in the wlrlib user library run linear regression and charge-to-breakdown (Q
ramp tests for wafer-level reliability (WLR) testing. These user modules are summarized in the table
below.
wlrlib user modules
User module
llsq1
qbd_rmpv
qbd_rmpj
For more information, refer to

Winulib user library

The Winulib user library provdes user interface routines for operator inputs and prompts, such as
abort, retry, and ignore decision prompts.
Winulib user modules
User Module
AbortRetryIgnoreDialog
(on page 6-322)
InputOkCancelDialog
page 6-323)
OkCancelDialog
page 6-325)
OkDialog
326)
RetryCancelDialog
page 6-328)
YesNoCancelDialog
page 6-329)
YesNoDialog
331)
4200A-901-01 Rev. C / February 2017
Wafer-Level Reliability Testing
Clarius Action Name
abortretryignoredialog
(on inputokcanceldialog
(on
okcanceldialog
(on page 6-
okdialog
(on retrycanceldialog
(on yesnocanceldialog
(on page 6- yesnodialog
Description
Performs simple linear regression.
Performs a charge-to-breakdown test using the
QBD V-ramp test.
Performs a charge-to-breakdown test using the
QBD J-ramp test.
(on page L-1).
Description
This user module creates a dialog box with
Abort, Retry, and Ignore decision prompts.
This user module creates a dialog box that
can prompt for up to four input parameters.
This user module creates a dialog box that
provides OK or Cancel decisions.
This user module creates a dialog box that
pauses the test sequence to make an
announcement (for example, "Test
finished") or prompt for an action (for
example, connection change).
This user module creates a dialog box that
presents Retry or Cancel decisions.
This user module creates a dialog box that
contains up to four lines of text and Yes,
No, or Cancel decisions.
This user module creates a dialog box that
contains up to four lines of text and Yes
and No buttons.
Section 6: Clarius
)
BD
6-321