Keithley 4200A-SCS Reference Manual page 722

Model 4200A-SCS Parameter Analyzer Reference Manual
DE page command strings
The DE page command strings include:
•
CH: SMU channel definition
•
VS: VS1...VSn channel definition
•
VM: VM1...VMn channel definition
SS page command strings
The SS page command strings include:
•
VR and IR: VAR1 setup
•
VP and IP: VAR2 setup
•
ST command: Auto standby
•
FS command: VAR1' setup
•
RT command: VAR1' setup
•
VL and IL commands: List sweep setup
•
VC and IC commands: SMU constant voltage or current setup
•
SC command: Constant VS setup
•
HT command: Set sweep hold time
•
DT command: Set sweep delay time
SM page command strings
The measurement setup (SM) page command strings include:
•
WT command: Set wait time
•
IN command: Set interval
•
NR command: Select number of readings
•
DM command: Select display mode
•
LI command: List mode, enables V and I functions for test sequence
•
XN command: Configure graph X-axis for electrical parameter
•
XT command: Configure graph X-axis for time domain
•
YA command: Configure graph Y1 axis
•
YB command: Configure graph Y2 axis
MD page command strings
The measurement control (MD) page command string includes:
•
ME command: Control measurements
4200A-901-01 Rev. C / February 2017
(on page 9-14)
(on page 9-15)
(on page 9-16)
(on page 9-17)
(on page 9-20)
(on page 9-22)
(on page 9-23)
(on page 9-24)
(on page 9-25)
(on page 9-27)
(on page 9-27)
(on page 9-28)
(on page 9-29)
(on page 9-29)
(on page 9-30)
(on page 9-30)
(on page 9-33)
(on page 9-34)
(on page 9-35)
Section 9: Keithley External Control Interface (KXCI)
(on page 9-26)
(on page 9-31)
(on page 9-32)
(on page 9-32)
9-11