Smeasv - Keithley 4200A-SCS Reference Manual

Hide thumbs Also See for 4200A-SCS:

Table of Contents

Section 13: LPT library function reference

smeasv

This command returns the DC bias voltages used for a sweep.

int smeasv(int instr_id, double *varray);

This command returns the DC bias voltages used in a sweep. The values are returned in an array.

The voltage values are posted to the Clarius Analyze sheet and graph after the test has finished.

You can also use the smeasvRT command to return sourced sweep DC bias voltage values in an

array. It posts the voltage values to Clarius in real time.

Use the measv command to return the DC bias voltage used for a single measurement.

(on page 13-178)

(on page 13-189)

The instrument identification code of the 4210-CVU: CVU1

Returned array of DC bias voltages

Model 4200A-SCS Parameter Analyzer Reference Manual

4200A-901-01 Rev. C / February 2017