Keithley 4200A-SCS Reference Manual page 395

Section 6: Clarius Model 4200A-SCS Parameter Analyzer Reference Manual
The configuration of an input array control, shown below, is similar to an edit box. The user module
does not provide support for the minimum, maximum, or default values for the arrays; only the UTM
UI provides this capability. The minimum and maximum values are single values that provide bounds
for each entry. The default values are a series of values for the array. Enter the default values for the
array separated by commas only (do not use any spaces).
Figure 286: InputArray UTM parameter UI configuration
6-126 4200A-901-01 Rev. C / February 2017