Keithley 4200A-SCS Reference Manual page 567

Hide thumbs Also See for 4200A-SCS:

Table of Contents

Section 6: Clarius

Add a test to the library

The following steps provide specifics on how to add a test to the library. You can follow the same

basic procedure to add devices, actions, and projects. The primary difference is the type of object and

which library the object is added to.

When you add a test to the library, Run Histories that are selected on the Analyze pane are included

with the new test. However, notes and aliases that were assigned to the Run History items in the

original test are not included.

To add a test to the library:

1. In Clarius, set up the test so that it contains the settings you want the new library object to have.

2. Open the Analyze pane.

3. Select the run histories that you want to include in the new test.

4. Open the Select pane.

5. Drag the test from the project tree to the library. You will see a copy of the test and a checkmark,

as shown in the figure below. The test is automatically added to the Tests library, regardless of

the tab that is open. When you drop the test, a confirmation dialog box is displayed.

6. Select OK. The Library Information Editor is displayed. Refer to

(on page 6-299) to complete the Library Information Editor.

Add a device to the Device Library

You can copy a device from the project tree to the library to create a new device.

To submit a device to a library:

1. In Clarius, choose Select.

2. In the project tree, drag the device into the library. The test is automatically added to the Devices

library, regardless of the tab that is open. A confirmation message is displayed.

3. Select OK. The Library Information Editor dialog box is displayed. Refer to

library object

Figure 388: Add a test to the Tests Library

(on page 6-299) to complete the Library Information Editor.

Model 4200A-SCS Parameter Analyzer Reference Manual

Edit information for a library

4200A-901-01 Rev. C / February 2017

Edit information for a