Samsung S5PC100 User Manual page 204

S5PC100 USER'S MANUAL (REV1.0)
and seven power domains except System Timer, ALIVE and RTC can be power-off by turning off switch cells
which connects the current path from VDD to GND.
How to control the power mode of Cortex-A8, SRAM, and other hard macros included in each power domain is
summarized in Table 2.4-8 and the detail description is given in Section 6 HARD MACRO POWER CONTROL.
Each hard macro has its own power-down mode. The power mode of SRAM, ROM, PLL, TS ADC and I/O are
controlled by power management. The power mode of hard macros except SRAM, ROM, PLL, TS ADC and I/O
should be controlled by corresponding control module. Note that in addition to PMU, CLKCON also controls the
PLL.
Power Domain
1 CPU
2 MFC
3 G3D
4 Audio Sub-system
5 LCD Sub-system
6 TV Sub-system
7 System Timer
8 TOP
9 ALIVE
10 RTC
Table 2.4-2 S5PC100 Power Domains
Cortex-A8 Core, L2 Cache, ETM , NEON
MFC
G3D
Audio related modules: I2S0, SRAM (128 KB)
CAMIF, DISPCON, G2D, JPEG, MIPI_CSI, MIPI_DSI, ROTATOR
HDMI, MIXER, TVEncoder, VP
System Timer
Others (AXI bridge, Memory controller, GPIO_OFF, peripherals, etc.)
Power Management Unit, GPIO_ALIVE, Wakeup Logic
RTC
Included Modules
Power Management
2.4-5