Samsung S5PC100 User Manual page 446

S5PC100 USER'S MANUAL (REV1.0)
Cmd Type
Write
Read
Write
Write
Write
Write
Write
Write
Write
Write
Write
Write
Write
Write
Write
Write
Write
Write
Write
Write
Write
Table 5.3-1 MAP10 Commands
Cmd Value[15:0]
0x0000 Save erase status to controller
- Send current or last erase status to AHB interface
0x0001 Save block address for multi-block erase
Save block address for single-block or the final block of a
0x0003
multi-block erase and initiate the erase
0x0008 Set unlock start address
0x0009 Set unlock end address and initiate the unlock
0x000a Set lock start address
0x000b Set lock end address and initiate the lock
0x000c Set lock-tight start address
0x000d Set lock-tight end address initiate the lock
0x000e Unlock the entire memory array
0x0010 Load page to the RMW buffer
0x0011 Write RMW buffer to memory
0x0012 Set up for OTP access
0x0013 Set up for spare area access only
0x0014 Set up for main area access only
0x0015 Verify erase block
0x0016 Set up for main and spare area access
0x1000 Set copy source address
0x20PP Set copy destination address and initiate copy of PP pages
Set up a pipeline read or pipeline write of PP pages
W = 0 for pipeline read
W = 1 for pipeline 2X write
W = 2 for pipeline 2X read
W = 3 for 2-way pipeline read
0x4WPP
W = 4 for 4-way pipeline read
W = 5 for Reserved
W = 6 for 2-way pipeline write
W = 7 for 4-way pipeline write
W = 8 for Reserved
ONENAND CONTROLLER
Function
5.3-9