ACCESS CONTROLLER (TZPC)
4.4 DECODE PROTECTION 0-2 SET REGISTERS
•
TZPCDECPROTxSet(TZPC0), W, Address = 0xE380_0804, 0xE380_0810
•
TZPCDECPROTxSet(TZPC1), W, Address = 0xE280_0804, 0xE280_0810, 0xE280_081C
•
TZPCDECPROTxSet(TZPC2), W, Address = 0xE290_0804, 0xE290_0810
TXPCDECPROTxSet
Reserved
DECPROTxSet
4.5 DECODE PROTECTION 0-2 CLEAR REGISTERS
•
TZPCDECPROTxClr(TZPC0), W, Address = 0xE380_0808, 0xE380_081C
•
TZPCDECPROTxClr(TZPC1), W, Address = 0xE280_0808, 0xE280_081C, 0xE280_0820
•
TZPCDECPROTxClr(TZPC2), W, Address = 0xE290_0808, 0xE290_081C
TXPCDECPROTxClr
Reserved
DECPROTxClr
3.3-8
Bit
[31:8]
Write as zero.
Sets the corresponding decode protection output:
0 = No effect
[7:0]
1 = Set decode region to non-secure
There is one bit of the register for each protection output,
eight outputs are implemented as standard.
Bit
[31:8]
Write as zero.
Clears the corresponding decode protection output:
0 = No effect
[7:0]
1 = Set decode region to secure
There is one bit of the register for each protection output,
eight outputs are implemented as standard.
S5PC100 USER'S MANUAL (REV1.0)
Description
Description
Reset Value
−
−
Reset Value
−
−