Samsung S5PC100 User Manual page 457

ONENAND CONTROLLER
4.16 FSA WIDTH REGISTER (FSA_WIDTH, R/W, ADDRESS = 0XE710_00F0)
FSA_WIDTH
Reserved
FSA
4.17 REVISION REGISTER (REVISION, R, ADDRESS = 0XE710_0100)
Revision
Reserved [31:16]
Revision [15:0]
4.18 SYNCHRONOUS MODE REGISTER (SYNC_MODE, R, ADDRESS = 0XE710_0130)
SYNC_MODE
Reserved [31:2]
RM
WM
5.3-20
Bit
[31:3] Reserved
Sets the number of bits used to represent the number of
[2:0] sectors. The default value is 0x2. Set by software during
initialization.
Bit
Reserved
Holds the controller revision number. Default value is 0x1.
Read-Only.
Bit
Reserved
Sets the transfer mode for read operations as synchronous or
asynchronous. Default value is 0x0. This value is copied from the
memory_configuration register [15]. Read-Only.
[1]
0 = Asynchronous Mode
1 = Activate Synchronous Mode
Sets the transfer mode for write operations as synchronous or
asynchronous. Default value is 0x0. Set by software during
initialization. This value is copied from the memory_configuration
[0]
register [1]. Read-Only.
0 = Asynchronous Mode
1 = Activate Synchronous Mode
S5PC100 USER'S MANUAL (REV1.0)
Description
Description
Description
Reset Value
Device
Dependent
Reset Value
0x09
Reset Value
0
0