Samsung S5PC100 User Manual page 733

S5PC100 USER'S MANUAL (REV1.0)
Rx Module:
•
Status Register
♦ FIFO status (fifo full, fifo empty, fifo write point, fifo read point)
♦ Sks..MIPI status (Internal status: Current status and Next status)
•
Configuration Register 0
♦ Select Operation mode (Stream mode or Frame mode)
♦ Fixed channel ID mode
♦ Number of channel
♦ Generated Error clear
♦ RxACK state timer and enable
♦ Rx state timer
•
Configuration Register 1
♦ Rx FIFO clear
♦ Rx FIFO timer and enable
•
Interrupt Source Register
♦ Rx FIFO full
♦ Rx FIFO timeout
♦ Data Receiving Done
♦ Break frame received
♦ Break frame receiving error
♦ RxACK state timeout
♦ Missed clock input
♦ Added clock input
•
Software Reset Register
•
Channel ID Register
•
Data Register
♦ Rx FIFO input
♦ Rx FIFO size (Flip-Flop FIFO, not memory)
− 32-bit width X 64 depth (256-Byte)
MIPI HSI INTERFACE CONTROLLER
8.6-3