Samsung S5PC100 User Manual page 456

S5PC100 USER'S MANUAL (REV1.0)
4.11 BOOT BUFFER SIZE REGISTER (BOOT_BUF_SIZE, R, ADDRESS = 0XE710_00A0)
BOOT_BUF_SIZE
Reserved
Memory Device
Dependent
4.12 AMOUNT OF BUFFER REGISTER (BUF_AMOUNT, R, ADDRESS = 0XE710_00B0)
BUF_AMOUNT
Reserved
Memory Device
Dependent
4.13 TECHNOLOGY REGISTER (TECH, R, ADDRESS = 0XE710_00C0)
TECH
Reserved
Memory Device
Dependent
4.14 FBA WIDTH REGISTER (FBA_WIDTH, R/W, ADDRESS = 0XE710_00D0)
FBA_WIDTH
Reserved
FBA
4.15 FPA WIDTH REGISTER (FPA_WIDTH, R/W, ADDRESS = 0XE710_00E0)
FPA_WIDTH
Reserved
FPA
Bit
[31:16] Reserved
The value programmed depends on the actual memory device
[15:0] being used. This register is set by the controller after reset.
Read-Only.
Bit
[31:16] Reserved
The value programmed depends on the actual memory device
[15:0]
being used. This register is set by the controller after reset.
Read-Only.
Bit
[31:16] Reserved
The value programmed depends on the actual memory device
[15:0] being used. This register is set by the controller after reset.
Read-Only.
Bit
[31:5] Reserved
Sets the number of bits is used to represent the number of
[4:0] blocks. The default value is 0x0A. Set by software during
initialization.
Bit
[31:5] Reserved
Sets the number of bits used to represent the number of pages.
[4:0]
The default value is 6. Set by software during initialization.
Description
Description
Description
Description
Description
ONENAND CONTROLLER
Reset Value
Device
Dependent
Reset Value
Device
Dependent
Reset Value
Device
Dependent
Reset Value
Device
Dependent
Reset Value
Device
Dependent
5.3-19