Samsung S5PC100 User Manual page 307

S5PC100 USER'S MANUAL (REV1.0)
5.3.20 Integrator's Gain Registers (APC_IGAIN1, R/W, Address = 0xE100_0060)
APC_IGAIN1
Reserved
Gain 1
5.3.21 Integrator's Gain Registers (APC_IGAIN2, R/W, Address = 0xE100_0064)
APC_IGAIN2
Reserved
Gain 2
5.3.22 Integrator's Gain Registers (APC_IGAIN3, R/W, Address = 0xE100_0068)
APC_IGAIN3
Reserved
Gain 3
5.3.23 Integrator's Gain Registers (APC_IGAIN4, R/W, Address = 0xE100_006C)
APC_IGAIN4
Reserved
Gain 4
Bits
[7:4] Read undefined. Write as zero.
[3:0] Default gain term for the dynamic compensator. The
programmable values for this gain term are one to ten. Rest
of the values are treated as zero in the closed-loop AVS
operations.
Bits
[7:4] Read undefined. Write as zero.
[3:0] Gain term for the upward voltage slew when enabled in the
APC_CLP_CTRL Register. The programmable values for
this gain term are one to ten. Rest of the values are treated
as zero in the closed-loop AVS operations.
Bits
[7:4] Read undefined. Write as zero.
[3:0] Dynamic compensator uses this gain term for the saturated
HPM output when enabled. The programmable values for
this gain term are one to ten. Rest of the values are treated
as zero in the closed-loop AVS operations.
Bits
[7:4] Read undefined. Write as zero.
[3:0] Selected by the dynamic compensator when enabled in the
APC_CL_CTRL Register for the low slack values. The
programmable values for this gain term are one to ten. Rest
of the values are treated as zero in the closed-loop AVS
operations.
INTELLIGENT ENERGY MANAGEMENT
Description
Description
Description
Description
Reset Value
0
0x0
Reset Value
0
0x0
Reset Value
0
0x0
Reset Value
0
0x0
2.5-35