S5PC100 USER'S MANUAL (REV1.0)
START
Slave Rx mode has
been configured.
I2C detects start signal. and, I2CDS
receives data.
I2C compares I2CADD and I2CDS
(the received slave address).
Matched?
Y
The I2C address match
interrupt is generated.
Read data from I2CDS.
Clear pending bit to
resume.
Stop?
N
SDA is shifted to I2CDS.
Interrupt is pending.
Figure 8.2-9 Operations for Slave/Receiver Mode
N
Y
END
2
I
C-BUS INTERFACE
8.2-9