Samsung S5PC100 User Manual page 197

S5PC100 USER'S MANUAL (REV1.0)
10.6.4 General Status Register (GENERAL_STATUS, R, Address = 0xE020_0104)
GENERAL_STATUS
Reserved
TRIGGER
Reserved
STANDBYWFI
Reserved
10.6.5 ENDIAN & EBI Configuration (MEM_SYS_CFG, R/W, Address = 0xE020_0200)
MEM_SYS_CFG
Reserved
EBI_PRI
Reserved
EBI_FIX_PRI
Reserved
ENDIAN
Bit
[31:14] Do not change this value
[13] ETM trigger flag
0 = Trigger does not occur
1 = Trigger occurs
[12:2] Do not change this value
[1] Standby mode flag generated by WFI operation
0 = Processor not in standby mode
1 = Processor in standby mode
[0] Do not change this value
Bit
[31:9] Reserved
Set EBI priority scheme.
[8]
0 = Fixed priority scheme.
1 = Circular priority scheme.
[7:6] Reserved
Set EBI fixed priority setting.
0 = SROMC - OneNANDC – NFCON – CFCON
[5:4] 1 = OneNANDC – SROMC – NFCON – CFCON
2 = NFCON – SROMC - OneNANDC – CFCON
3 = CFCON – SROMC - OneNANDC – NFCON
[3:1] Reserved
Set NFCON and SROMC endian control
[0] 0 = Little endian
1 = Big endian
Description
Description
CLOCK CONTROLLER
Reset Value
18'b0
1'b0
11'b0
1'b0
1'b0
Reset Value
0
0
0
0
2.3-47