Samsung S5PC100 User Manual page 462

S5PC100 USER'S MANUAL (REV1.0)
4.34 COLD RESET DELAY ENABLE REGISTER (COLD_RST_DLY, R/W, ADDRESS = 0XE710_02A0)
COLD_RST_DLY
Reserved
Cold_Reset_Delay
4.35 DDP DEVICE INDICATOR ENABLE REGISTER (DDP_DEVICE, R/W, ADDRESS = 0XE710_02B0)
DDP_DEVICE
Reserved
DDP_Device
4.36 MULTI-PLANE ENABLE REGISTER (MULTI_PLANE, R/W, ADDRESS = 0XE710_02C0)
MULTI_PLANE
Reserved
MP_Device
4.37 MEMORY COUNTER REGISTER (MEM_CNT, R/W, ADDRESS = 0XE710_02D0)
MEM_CNT
Reserved
Memory_Counter
4.38 TRANSFER_MODE (TRANS_MODE, R, ADDRESS = 0XE710_02E0)
TRANS_MODE
Reserved
Tsfr_Mode
Bit
[31:15] Reserved
Defines the value for cold reset delay. After a cold reset, the
[14:0] The controller waits for this number of cycles before reading
the device registers.
Bit
[31:1] Reserved
DDP device indicator. Set by software during initialization.
[0] 0 = Non-DDP part
1 = DDP part
Bit
[31:1] Reserved
Enables Multi-plane. Set by software during initialization.
[0] 0 = Not a Multi-plane device
1 = Multi-plane device
Bit
[31:16] Reserved
Indicates the number of pages that have been transferred.
[15:0]
A free-running counter controls this register's value.
Bit
[31:2] Reserved
Indicates transfer area of the memory. Read-Only.
00 = Main Area Only
[1:0] 01 = Spare Area Only
10 = Main + Spare Area
11 = Reserved
Description
Description
Description
Description
Description
ONENAND CONTROLLER
Reset Value
0x3355
Reset Value
Device
Dependent
Reset Value
0x1
Reset Value
0
Reset Value
0
5.3-25