Administer And Enable The Ip Server Interface - Avaya S8700 Installing Manual

56 Installing the Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
Customize the Active Media Server
Fill in the location and carrier type for media gateways 2, 3, and 4.
2
add cabinet 1
CABINET DESCRIPTION
CARRIER DESCRIPTION
Carrier

Administer and enable the IP Server Interface

NOTE:
Do this procedure only if the translations were not input earlier.
The following administration uses the services laptop computer connected to the active media
server and uses a terminal emulation application.
NOTE:
This procedure enables the IPSI circuit packs and allows them to control the port
networks.
1 Type change system-parameters ipserver-interface and press
change system-parameters ipserver-interface
SERVER INFORMATION
OPTIONS
Verify that the Primary Control Subnet Address is correct.
2
Cabinet: 1
Cabinet Layout: rack-mount-stack
Cabinet Type: expansion-portnetwork
Location: 1
Room:
Carrier Type
D rmc-port
C rmc-port
B rmc-port
A rmc-port
IP SERVER INTERFACE (IPSI) SYSTEM PARAMETERS
IPSI Host Name Prefix:
Primary Control Subnet Address: 172. 22.
Secondary Control Subnet Address:
Switch Identifier: A
IPSI Control of Port Networks: enabled
NOTE: * indicates data changed on the server
CABINET
Floor:
Number
0. 0*
. . .
May 2003
Page 1 of 1
Building:
.
Enter
Page 1 of 1