Avaya S8700 Maintenance Manual page 110

Alarms, Errors, and Troubleshooting
display circuit-packs 2
Cabinet:
Cabinet Layout:
Slot Code Sfx Name
01: TN2305 ATM PNC EI
02:
03:
04:
05:
06:
07:
08:
09: TN767 E
10: TN754 B
'#' indicates circuit pack conflict.
Figure 4-12. Screen output for display circuit-packs 2
4. Enter display atm pnc port network on the S8700 Multi-Connect SAT.
This display tells you the ATM addresses that have been administered for
each TN230X. Verify that each ATM address (the concatenation of the five
displayed hexadecimal fields) is correct and match those administered in
the A500. See
Administered with hard coded PNNI routes
If the port networks are addressed using hard coded PNNI routes in the
A500, the display looks like
4-36 Issue 1 May 2002
CIRCUIT PACKS
2
single-carrier-stack
DS1 INTERFACE
DIGITAL LINE
''A500 Administration'' on page 4-39
Figure 4-13
Carrier: A
Carrier Type: expansion-control
Slot Code Sfx Name
11: TN746 B ANALOG LINE
12:
13:
14:
15:
16:
17: TN754 C DIGITAL LINE
(pnc 1) and
for more information.
Figure 4-14 (pnc 2).
555-233-143