Table of Contents
Advertisement
Command
EXEC Privilege
Modes
Command
Version 8.3.16.1
History
Usage
The Dell Networking OS supports a maximum of 100 files at the root directory
Information
level, on both the internal and external Flash.
The usbflash commands are supported. For a list of approved USB vendors, refer
to the Dell Networking OS Release Notes.
When copying a file to a remote location (for example, using Secure Copy [SCP]),
enter only the keywords and Dell Networking OS prompts you need for the rest of
the information. For example, when using SCP, you can enter copy running-
config scp: where running-config is the source and the target is specified in
the ensuing prompts. The Dell Networking OS prompts you to enter any required
information, as needed for the named destination—remote destination, destination
filename, user ID, password, and so forth.
When you use the copy running-config startup-config command to copy
the running configuration (the startup configuration file amended by any
configuration changes made since the system was started) to the startup
configuration file, the Dell Networking OS creates a backup file on the internal flash
of the startup configuration.
The Dell Networking OS supports copying the running-configuration to a TFTP
server or to an FTP server. For example:
•
•
Example
Dell#copy running-config scp:
Address or name of remote host []: 10.10.10.1
Port number of the server [22]: 99
Destination file name [startup-config]: old_running
User name to login remote host: sburgess
Password to login remote host:
Password to login remote host? dilling
In this copy scp: flash: example, specifying SCP in the first position indicates
that the target is to be specified in the ensuing prompts. Entering flash: in the
60
To copy the
running
configuration
To copy the
startup
configuration
To copy a file
on the external
FLASH
Introduced on the MXL 10/40GbE Switch IO Module.
copy running-config tftp:
copy running-config ftp:
Enter the keywords running-config.
Enter the keywords startup-config.
Enter the keyword slot0:// then the
filename.
File Management
Advertisement
Table of Contents
