flash://
img-file
hash-value
Defaults
flash drive
Command
EXEC mode
Modes
Command
Version 9.5.(0.0)
History
Introduced on the Z9000, S6000, S4820T, S4810, MXL
Usage
You can enter this command in the following ways:
Information
•
•
•
•
Example
Without Entering the Hash Value for Verification using SHA256
Dell# verify sha256 flash://FTOS-SE-9.5.0.0.bin
SHA256 hash for FTOS-SE-9.5.0.0.bin:
e6328c06faf814e6899ceead219afbf9360e986d692988023b749e6b2093e93
3
Entering the Hash Value for Verification using SHA256
Dell# verify sha256 flash://FTOS-SE-9.5.0.0.bin
e6328c06faf814e6899ceead219afbf9360e986d692988023b749e6b2093e93
3
SHA256 hash VERIFIED for FTOS-SE-9.5.0.0.bin
File Management
(Optional). Enter the flash:// keyword. The default is to
use the flash drive. You can just enter the image file name.
Enter the name the Dell Networking software image file to
validate.
(Optional). Enter the relevant hash published on i-Support.
verify md5 flash://img-file
verify md5 flash://img-file <hash-value>
verify sha256 flash://img-file
verify sha256 flash://img-file <hash-value>
77