Show Command-Tree - Dell MXL 10GbE Reference Manual

show command-tree

Display the entire CLI command tree, and optionally, display the utilization count for each command and
its options.
Syntax
show command-tree [count | no]
Parameters
count
no
Defaults none
Command
•
Modes
•
Command
Version 8.3.16.1
History
Usage Reload the system to reset the command-tree counters.
Information
Example
Dell#show command-tree count
!
Enable privilege mode:
calendar
set
hh:mm:ss
<1-31>
<MONTH>
<1993-2035>
<MONTH>
<1-31>
<1993-2035>
clear arp-cache
clear ip dhcp
binding
A.B.C.D
client
statistics
102
Display the command tree with a usage counter for each
command.
Display all of the commands that may be preceded by the
keyword no, which is the keyword used to remove a
command from the running-configuration.
EXEC
EXEC Privilege
Introduced on the MXL 10/40GbE Switch IO Module.
interface
fastethernet
SLOT/PORT
fortyGigE
SLOT/PORT
SLOT/PORT
managementethernet
SLOT/PORT
port-channel
<1-128>
tengigabitethernet
SLOT/PORT
vlan
<1-4094>
command usage:5
option usage: 0
option usage: 0
option usage: 0
option usage: 0
option usage: 0
option usage: 0
option usage: 0
option usage: 0
command usage:2
command usage:1
option usage: 0
option usage: 0
option usage: 0
option usage: 0
option usage: 0
option usage: 0
option usage: 0
option usage: 0
option usage: 0
option usage: 0
option usage: 0
option usage: 0
option usage: 0
option usage: 0
option usage: 0
option usage: 0
option usage: 0
option usage: 0
Control and Monitoring