Table of Contents
Advertisement
in
Command
EXEC Privilege
Modes
Command
Version 8.3.16.1
History
Example
Dell#show ip access-lists
Standard Ingress IP access list test
seq 5 permit 1.1.1.0/24 count (0 packets)
seq 10 deny 2.1.1.0/24 count (0 packets)
show ip accounting access-list
Display the IP access-lists created on the switch and the sequence of filters.
Syntax
show ip accounting {access-list access-list-name | cam_count}
interface interface
Parameters
access-list-
name
cam_count
interface
interface
Command
•
Modes
•
Command
Version 8.3.16.1
History
146
•
For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
•
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
•
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Identify whether ACL is applied on the ingress or egress side.
Introduced on the MXL 10/40GbE Switch IO Module.
test
in
Enter the name of the ACL to be displayed.
List the count of the CAM rules for this ACL.
Enter the keyword interface then the one of the following
keywords and slot/port or number information:
•
For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
•
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
•
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
EXEC
EXEC Privilege
Introduced on the MXL 10/40GbE Switch IO Module.
Access Control Lists (ACL)
Advertisement
Table of Contents
