Show Dot1X Cos-Mapping Interface - Dell MXL 10GbE Reference Manual

Defaults 30 seconds
Command INTERFACE
Modes
Command
Version 9.2(0.0)
History

show dot1x cos-mapping interface

Display the CoS priority-mapping table the RADIUS server provides and applies to authenticated
supplicants on an 802.1X-enabled system.
Syntax
show dot1x cos-mapping interface interface [mac-address mac-
address]
Parameters
interface
mac-address
Defaults none
Command
•
Modes
•
Command
Version 9.2(0.0)
History
Usage
To display CoS mapping information only for the specified supplicant, enter a
Information
supplicant's MAC address using the mac-address option.
You can display the CoS mapping information applied to traffic from authenticated
supplicants on 802.1X-enabled ports that are in Single-Hot, Multi-Host, and Multi-
Supplicant authentication modes.
Example
Dell#show dot1x cos-mapping interface tengigabitethernet 0/32
802.1p CoS re-map table on Te 0/32:
----------------------------------
Dot1p
802.1X
Introduced on the MXL 10/40GbE Switch IO Module.
Enter one of the following keywords and slot/port or number
information:
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet then the slot/port information.
• For a Fast Ethernet interface, enter the keyword
FastEthernet then the slot/port information.
• For a Ten-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
(Optional) MAC address of an 802.1X-authenticated
supplicant.
EXEC
EXEC privilege
Introduced on the MXL 10/40GbE Switch IO Module.
Remapped Dot1p
135