Line - Dell MXL 10GbE Reference Manual

Command
Verison 8.3.16.1
History

line

Enable and configure console and virtual terminal lines to the system. This command accesses LINE
mode, where you can set the access conditions for the designated line.
Syntax
line {console 0 | vty number [end-number]}
Parameters
console 0
vty number
end-number
Defaults Not configured
Command CONFIGURATION
Modes
Command
Version 8.3.17.0
History
Usage You cannot delete a terminal connection.
Information
Related
show memory
Commands
motd-banner
Enable a message of the day (MOTD) banner to appear when you log in to the system.
Syntax
motd-banner
Defaults Enabled on all lines.
Command LINE
Modes
Command
Version 8.3.16.1
History
Control and Monitoring
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the keyword console 0 to configure the console
port. The console option is <0-0>.
Enter the keyword vty then a number from 0 to 9 to
configure a virtual terminal line for Telnet sessions. The
system supports 10 Telnet sessions.
(OPTIONAL) Enter a number from 1 to 9 as the last virtual
terminal line to configure. You can configure multiple lines at
one time.
Supported on the M I/O Aggregator.
— view current memory usage on the M I/O Aggregator.
Introduced on the MXL 10/40GbE Switch IO Module.
95