Logging Coredump Server - Dell MXL 10GbE Reference Manual

Command CONFIGURATION
Modes
Command
Version 8.3.16.1
History
Usage The kernel coredump can be large and may take five to 30 minutes to upload.
Information
The Dell Networking OS does not overwrite application coredumps so you should
delete them as necessary to conserve space on the flash; if the flash is out of
memory, the coredump is aborted.
If the FTP server is not reachable, the application coredump is aborted. The Dell
Networking OS completes the coredump process and waits until the upload is
complete before rebooting the system.
Related

logging coredump server

Commands
logging coredump server
Designate a server to upload core dumps.
Syntax
logging coredump server {ipv4-address} username name password
[type] password
Parameters
{ipv4-address }
name
type
password
Defaults Crash kernel files are uploaded to flash by default.
Command CONFIGURATION
Modes
Command
Version 8.4.16.1
History
Usage Because flash space may be limited, using this command ensures your entire crash
Information kernel files are uploaded successfully and completely. Only a single coredump
server can be configured. Configuration of a new coredump server over-writes any
previously configured server.
64
Introduced on the MXL 10/40GbE Switch IO Module.
— designates a server to upload kernel coredumps.
Enter the server IPv4 address (A.B.C.D).
Enter a username to access the target server.
Enter the password type:
• Enter 0 to enter an unencrypted password.
• Enter 7 to enter a password that has already been
encrypted using a Type 7 hashing algorithm.
Enter a password to access the target server.
Introduced on the MXL 10/40GbE Switch IO Module.
File Management