Ip Ftp Username - Dell MXL 10GbE Reference Manual

ip ftp username

Assign a user name for outgoing FTP connection requests.
Syntax
ip ftp username username
Parameters
username
Defaults No user name is configured.
Command CONFIGURATION
Modes
Command
Version 8.3.16.1
History
Usage Configure a password with the ip ftp password command.
Information
Related ip ftp password
Commands
ip telnet server enable
Enable the Telnet server on the switch.
Syntax
ip telnet server enable
To disable the Telnet server, use the no ip telnet server enable command.
Defaults Enabled
Command CONFIGURATION
Modes
Command
Version 8.3.16.1
History
Related ip ssh server
Commands
ip telnet source-interface
Set an interface's IP address as the source address in outgoing packets for Telnet sessions.
Syntax
ip telnet source-interface interface
Parameters
interface
Control and Monitoring
Enter a text string as the user name up to 40 characters long.
Introduced on the MXL 10/40GbE Switch IO Module.
— sets the password for FTP connections.
Introduced on the MXL 10/40GbE Switch IO Module.
— enables the secure shell (SSH) server on the system.
Enter the following keywords and slot/port or number
information:
93