Dell MXL 10GbE Reference Manual page 71

configured
status
Command EXEC Privilege
Modes
Command
Version 8.3.16.1
History
Example
Dell#show running-config
Current Configuration ...
! Version E8-3-16-29
! Last configuration change at Thu Apr 26 19:19:21 2012 by
admin
! Startup-config last updated at Thu Apr 26 19:19:04 2012 by
default
!
boot system stack-unit 0 primary system: A:
boot system stack-unit 0 secondary tftp://10.11.200.241/dt-
m1000e-5-c2
boot system gateway 10.11.209.254
!
redundancy auto-synchronize full
redundancy disable-auto-reboot stack-unit
!
redundancy disable-auto-reboot stack-unit 0
redundancy disable-auto-reboot stack-unit 1
redundancy disable-auto-reboot stack-unit 2
redundancy disable-auto-reboot stack-unit 5
!--More--
service timestamps log datetime
logging coredump stack-unit all
!
hostname FTOS
File Management
for the current route map
route-map
configuration
for the current SNMP configuration
snmp
for the current spanning tree
spanning-
configuration
tree
for the current static route
static
configuration
for the file status information
status
for the current TACACS+
tacacs+
configuration
for the current TFTP configuration
tftp
for the current users configuration
users
for the current wred-profile
wred-profile
configuration
(OPTIONAL) Enter the keyword configuration to display
line card interfaces with non-default configurations only.
(OPTIONAL) Enter the keyword status to display the
checksum for the running configuration and the start-up
configuration.
Introduced on the MXL 10/40GbE Switch IO Module.
71