Related
debug cpu-traffic-stats
Commands
show debugging
View a list of all enabled debugging processes.
Syntax
show debugging
Command
EXEC Privilege
Modes
Command
Version 8.3.16.1
History
Example
Dell#show debug
Generic IP: (Access List: test)
OSPF:1
DHCP:
Dell#
show environment
View system component status (for example, temperature or voltage).
Syntax
show environment [all | stack-unit unit-id]
Parameters
all
stack-unit unit-
id
thermal sensor
Command
•
Modes
•
Command
Version 8.3.16.1
History
104
— enables CPU traffic statistics for debugging.
Introduced on the MXL 10/40GbE Switch IO Module.
IP packet debugging is on for (Access List: test)
TenGigabitEthernet 0/16
ICMP packet debugging is on for
TenGigabitEthernet 0/16
OSPF packet debugging is on
DHCP debugging is on
Enter the keyword all to view all components.
Enter the keyword stack-unit then the unit-id to display
information on a specific stack member. The range is from 0
to 5.
Enter the keywords thermal-sensor to view all
components.
EXEC
EXEC Privildge
Introduced on the MXL 10/40GbE Switch IO Module.
Control and Monitoring