Show Cpu-Traffic-Stats - Dell MXL 10GbE Reference Manual

conflict
server
clear ip fib
clear ip route
Dell#

show cpu-traffic-stats

View the CPU traffic statistics.
Syntax
show cpu-traffic-stats [port number | all]
Parameters
port number
all
Defaults all
Command EXEC
Modes
Command
Version 8.3.16.1
History
Usage Traffic statistics are sorted on a per-interface basis; the interface receiving the most
Information traffic is displayed first. All CPU and port information is displayed unless a specific
port or CPU is specified. Traffic information is displayed for router ports only; not
for management interfaces. The traffic statistics are collected only after the debug
cpu-traffic-stats command is executed; not from the system bootup.
Example
Dell#show cpu-traffic-stats
Processor : CP
--------------
packets:100
Dell#
Control and Monitoring
A.B.C.D
statistics
snooping
binding
(OPTIONAL) Enter the port number to display traffic statistics
on that port only. The range is from 1 to 1568.
(OPTIONAL) Enter the keyword all to display traffic
statistics on all the interfaces receiving traffic, sorted based
on the traffic.
Introduced on the MXL 10/40GbE Switch IO Module.
NOTE: After debugging is complete, use the no debug cpu-traffic-
stats command to shut off traffic statistics collection.
Received 100% traffic on TenGigabitEthernet 8/2 Total
LLC:0, SNAP:0, IP:100, ARP:0, other:0
Unicast:100, Multicast:0, Broadcast:0
option usage: 0
option usage: 0
option usage: 0
option usage: 0
option usage: 0
option usage: 0
command usage:4
command usage:1
103