Table of Contents
Advertisement
SONET_Usr.bk Page 106 Wednesday, December 13, 2000 11:11 AM
Making Measurements
Making Analysis Measurements
Making Analysis Measurements
Description
G.826, M.2101, M.2110 and M.2120 analysis results are provided for all relevant
SDH/SONET error sources.
In addition the following results are provided:
1 Set up the receive SDH/SONET interface and payload required. See "Setting
HOW TO:
2 If required set up the SDH/SONET transmit interface and payload. See "Setting
3 Press
4 You can view the analysis results on the
TIP:
The measurement will not be affected if you switch between the different results
provided.
106
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Cumulative error count and error ratio
Short term error count and error ratio
Alarm seconds
Frequency and optical power
Pointer values and pointer adjustment counts
Pointer graph
Receive Interface" on page 30 (for SDH) and page 70 (for SONET).
Transmit Interface" on page 20 (for SDH) and page 60 (for SONET).
to start the measurement.
RUN/STOP
display.
ERROR ANALYSIS
,
or
SONET
SDH
RESULTS
,
Advertisement
Table of Contents
