Local-Preference - Dell PowerConnect J-EX4200-24T Software Manual

local-preference

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
local-preference local-preference;
[edit logical-systems logical-system-name protocols bgp],
[edit logical-systems logical-system-name protocols bgp group group-name],
[edit logical-systems logical-system-name protocols bgp group group-name
neighbor address],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp group group-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp group group-name neighbor address],
[edit protocols bgp],
[edit protocols bgp group group-name],
[edit protocols bgp group group-name neighbor address],
[edit routing-instances routing-instance-name protocols bgp],
[edit routing-instances routing-instance-name protocols bgp group group-name],
[edit routing-instances routing-instance-name protocols bgp group group-name
neighbor address]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Modify the value of the
LOCAL_PREF
sessions to indicate the degree of preference for an external route. The route with the
highest local preference value is preferred.
The path attribute always is advertised to internal BGP peers and to
LOCAL_PREF
neighboring confederations. It is never advertised to external BGP peers.
If you omit this statement, the
local-preference —Preference to assign to routes learned from BGP or from the group or
peer.
Range: 0 through 4,294,967,295 (2
Default: If the
LOCAL_PREF
route is received without a
stored in the routing table and advertised by BGP) as if it were received with a
value of 100. By default, non-BGP routes that are advertised by BGP
LOCAL_PREF
are advertised with a
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
preference on page 1660
Configuring the Local Preference Value for BGP Routes
Chapter 73: Configuration Statements for Layer 3 Protocols
path attribute, which is a metric used by IBGP
path attribute, if present, is not modified.
LOCAL_PREF
32
– 1)
path attribute is present, do not modify its value. If a BGP
attribute, the route is handled locally (it is
LOCAL_PREF
value of 100.
LOCAL_PREF
1599