Set Automatic-Tag - Dell S4810 Reference Manual

Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage
You can prepend up to eight AS numbers to a BGP route.
Information
This command influences best path selection in BGP by inserting a tag or AS
number into the AS_PATH attribute.
Related
match as-path
Commands
ip as-path access-list
show ip community-lists

set automatic-tag

To automatically compute the tag value of the route, configure a filter.
S4810
Syntax
set automatic-tag
To return to the default, enter no set automatic-tag.
Defaults Not configured.
Command ROUTE-MAP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Access Control Lists (ACL)
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— redistributes routes that match an AS-PATH attribute.
— configures an AS-PATH access list.
— displays configured IP Community access lists.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
285