Set Automatic-Tag - Dell Z9500 Reference Manual

show ip community-lists

set automatic-tag

To automatically compute the tag value of the route, configure a filter.
Z9500
Syntax
set automatic-tag
To return to the default, enter no set automatic-tag.
Defaults Not configured.
Command ROUTE-MAP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
6.1.1.0
Related
set level
Commands
set metric
set metric-type
set tag
306
— displays configured IP Community access lists.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— specify the OSPF area for route redistribution.
— specify the metric value assigned to redistributed routes.
— specify the metric type assigned to redistributed routes.
— specify the tag assigned to redistributed routes.
Access Control Lists (ACL)