Version
6.1.1.0
Related
set as-path
Commands
match community
To match routes that have a certain COMMUNITY attribute in their BGP path, configure a filter.
Z9500
Syntax
match community community-list-name [exact]
To delete a community match filter, use the no match community command.
Parameters
community-
list-name
exact
Defaults
Not configured.
Command
ROUTE-MAP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
6.1.1.0
Related
ip community-list
Commands
set community
308
Description
Introduced on the E-Series.
— adds information to the BGP AS_PATH attribute.
Enter the name of a configured community list.
(OPTIONAL) Enter the keywords exact to process only
those routes with this community list name.
Description
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— configures an Community Access list.
— specifies a COMMUNITY attribute.
Access Control Lists (ACL)