Match Community - Dell S6000 Reference Manual

Defaults Not configured.
Command ROUTE-MAP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Related set as-path
Commands

match community

To match routes that have a certain COMMUNITY attribute in their BGP path, configure a filter.
S6000
Syntax
match community community-list-name [exact]
To delete a community match filter, use the no match community command.
Parameters
community-
list-name
exact
Defaults Not configured.
Command ROUTE-MAP
Modes
Access Control Lists (ACL)
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Increased the name string to accept up to 140 characters.
Prior to 7.8.1.0, names are up to 16 characters long.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— adds information to the BGP AS_PATH attribute.
Enter the name of a configured community list.
(OPTIONAL) Enter the keywords exact to process only
those routes with this community list name.
235