Match Community - Dell S4810 Reference Manual

Version 7.5.1.0
pre-Version
6.1.1.0
Related set as-path
Commands

match community

To match routes that have a certain COMMUNITY attribute in their BGP path, configure a filter.
S4810
Syntax
match community community-list-name [exact]
To delete a community match filter, use the no match community command.
Parameters
community-
list-name
exact
Defaults Not configured.
Command ROUTE-MAP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Related
set community
Commands
272
Introduced on the C-Series.
Introduced on the E-Series.
— adds information to the BGP AS_PATH attribute.
Enter the name of a configured community list.
(OPTIONAL) Enter the keywords exact to process only
those routes with this community list name.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— specifies a COMMUNITY attribute.
Access Control Lists (ACL)