Table of Contents
Advertisement
IP A
P
DDRESSING AND
ROTOCOL
SHOW IP INTERFACE
show ip interface
Overview
Use this command to display information about interfaces and the IP addresses
assigned to them. To display information about a specific interface, specify the
interface name with the command.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ip interface [<interface-list>] [brief]
Syntax
Mode
User Exec and Privileged Exec
Examples
To show brief information for the assigned IP address for interface port1.0.2 use
the command:
awplus#
To show the IP addresses assigned to vlan2 and vlan3, use the command:
awplus#
Output
Figure 18-4: Example output from the show ip interface brief command
C613-50103-01 REV A
C
OMMANDS
Parameter
<interface-list> The interfaces to display information about. An interface-list
show ip interface port1.0.2 brief
show ip interface vlan2-3 brief
Interface
port1.0.2
vlan1
vlan2
vlan3
vlan8
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
can be:
• an interface, e.g. vlan2
• a continuous range of interfaces separated by a hyphen, e.g.
vlan2-8 or vlan2-vlan5
• a comma-separated list of interfaces or interface ranges, e.g.
vlan2,vlan5,vlan8-10
The specified interfaces must exist.
IP-Address
Status
unassigned
admin up
192.168.1.1
admin up
192.168.2.1
admin up
192.168.3.1
admin up
unassigned
admin up
"Getting Started
Guide.
Protocol
down
running
running
running
down
694
Advertisement
Table of Contents
