IP Unicast Commands
enable icmp timestamp
enable icmp timestamp {vlan <name>}
Description
Enables the generation of an ICMP timestamp response on one or all VLANs.
Syntax Description
name
Specifies a VLAN name.
Default
Enabled.
Usage Guidelines
Enables the generation of an ICMP timestamp response (type 14, code 0) when an ICMP timestamp
request is received. If a VLAN is not specified, the command applies to all IP interfaces.
This command only affects the generation of certain ICMP packets. Filtering of ICMP packets usually
forwarded by the switch is controlled by the access-list commands.
Example
The following command enables the generation of an ICMP timestamp response on VLAN accounting:
enable icmp timestamp vlan accounting
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1126
ExtremeWare XOS 11.3 Command Reference