Commands for Virtual Routers
create virtual-router
create virtual-router <vr-name>
Description
Creates a virtual router.
Syntax Description
vr-name
Specifies the name of the virtual router.
Default
N/A.
Usage Guidelines
A virtual router is identified by a name (up to 32 characters long). The name must be unique among the
VLAN and virtual router names on the switch. For backward compatibility, you cannot name a virtual
router VR-0, VR-1, or VR-2. Virtual router names are case insensitive.
When a new virtual router is created, by default, no ports are assigned, no VLAN interface is created,
and no support for any routing protocols is added.
Example
The following command creates the virtual router vr-acme:
create virtual-router vr-acme
History
This command was first available in ExtremeWare XOS 11.0.
264
ExtremeWare XOS 11.0 Command Reference Guide