configure vr delete protocol
configure vr <vr-name> delete protocol <protocol-name>
Description
Stops and removes the layer 3 protocol on a virtual router.
Syntax Description
vr-name
protocol-name
Default
N/A.
Usage Guidelines
You cannot add or delete protocols from the system virtual routers, VR-Mgmt, VR-Control, VR-Default.
Example
The following command shutdowns and removes RIP from the virtual router vr-acme:
configure vr vr-acme delete protocol rip
History
This command was first available in ExtremeWare XOS 11.0.
ExtremeWare XOS 11.0 Command Reference Guide
Specifies the name of the virtual router.
Specifies the layer 3 protocol.
configure vr delete protocol
267