Monitoring The Redundancy Status Of Line Modules; Table 8: Show Redundancy History Output Fields - Juniper SERVICE AVAILABILITY - CONFIGURATION GUIDE V 11.1.X Configuration Manual

activation statistics:
SRP activation time
-------------------
2004-09-08 15:10:40
2004-09-08 14:39:10
Table 8 on page 51 lists the show redundancy history command output fields.
Meaning

Table 8: show redundancy history Output Fields

Related Topics

Monitoring the Redundancy Status of Line Modules

Display redundancy information specific to line modules.
Purpose
cold starts:
switchovers:
cold:
warm:
consecutive warm:
type
----------
cold-start
cold-start
Field Name
system up time
last cold start
last cold switchover
last warm switchover
cold starts
switchovers
SRP activation time
type
slot
system uptime
running release
show redundancy history
Chapter 3: Managing Stateful SRP Switchover
92
21
147
0
system
slot uptime
---- ------ -----------------
00 --- erx_6-0-0b1-8.rel
00 --- erx_6-0-0b1-1.rel
Field Description
Amount of time elapsed since the last cold boot.
Date and time the router experienced the last cold
start.
Date and time the router experienced the last cold
switchover.
Date and time the router experienced the last warm
switchover.
Total number of cold starts the router has
experienced.
Number of cold, warm, and consecutive warm
switchovers the router has experienced.
Amount of time the SRP module has been active.
Last type of activation that occurred on this router.
Slot in which the line module resides.
Amount of time the chassis has been operational.
Release running on the SRP module at the time.

Monitoring the Redundancy Status of Line Modules

running release
51