Table 13: Show Aaa Domain-Map Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

JunosE 11.3.x Broadband Access Configuration Guide
118

Table 13: show aaa domain-map Output Fields

Field Name
Domain
auth-router-name
ip-router-name
router-mask
tunnel-group
ipv6-router-name
local-interface
ipv6-local-interface
poolname
IP hint
strip-domain
override-username
override-password
Tunnel Tag
Tunnel Peer
Tunnel Source
Tunnel Type
Tunnel Medium
Tunnel Password
Tunnel Id
Field Description
Name of the domain
Access virtual router to which user domain name is
mapped
IPv4 virtual router to which user domain name is
mapped
IP mask of the local interface
Name of the tunnel group assigned to the domain
map
IPv6 virtual router to which user domain name is
mapped
Interface information to use on the local (E Series)
side of the subscriber's interface
IPv6 interface information to use on the local (E
Series) side of the subscriber's interface
Local address pool from which the router allocates
addresses for this domain
IP hint is enabled
Strip domain is enabled
Single username used for all users from a domain in
place of the values received from the remote client
Single password used for all users from a domain in
place of the values received from the remote client
Tag that identifies the tunnel
Destination address of the tunnel
Source address of the tunnel
L2TP
Type of medium for the tunnel; only IPv4 is supported
Password for the tunnel
ID of the tunnel
Copyright © 2010, Juniper Networks, Inc.