Clear Port Mirror; Clear Port Preference - 3Com WX4400 Command Reference Manual

clear port mirror

clear port
preference
Examples — The following command clears the names of ports 1
through 3:
WX4400# clear port 1-3 name
See Also
display port status on page 77
set port name on page 91
Removes a port mirroring configuration.
Syntax —
clear port mirror
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 4.2.
Examples — The following command clears the port mirroring
configuration from the switch:
WX4400# clear port mirror
See Also
display port mirror on page 75
set port mirror on page 90
Resets a gigabit Ethernet port on a WX4400 to use the GBIC (fiber)
interface for the active link.
Syntax —
clear port preference port-list
— List of physical ports. MSS clears the preference on all
port-list
the specified ports.
Defaults — When both the copper and fiber interfaces of a gigabit
Ethernet port are connected, the GBIC (fiber) interface is the active link.
The RJ-45 (copper) link is unused.
Access — Enabled.
clear port mirror 71