Ooting And; Onfiguring The; Connecting The Router To A Local Console Terminal; Setting The Parameters Of The Console Terminal - 3Com Router 3016 Installation Manual

4
Connecting the Router
to a Local Console
Terminal
Setting the
Parameters of the
Console Terminal
B

OOTING AND

R
OUTER
During the initial configuration of the router, you can use only the console or AUX
port. This chapter describes how to connect the router to a local or remote
console terminal and how to set parameters at the console terminal.
To set up the local configuration environment, connect the RJ-45 connector of the
console cable to the console port on the router, and the DB-25 connector or DB-9
connector to the serial interface of a PC, as shown in Figure 1.
Figure 1 Local Configuration Through the Console Port
RS232 Serial interface
PC
Console cable
To set terminal parameters:
1 Start the PC and select Start > Programs > Accessories > Communications >
HyperTerminal.
The HyperTerminal window displays the Connection Description dialog box, as
shown in Figure 2.
2 Enter the name of the new connection in the Name field and click OK. The
Connect To dialog box, shown in Figure 3 displays.
3 Select the serial port for the connection from the Connect using dropdown menu
and click OK. The Connection Properties dialog box, shown in Figure 4 displays.
C

ONFIGURING THE

Router 3012
Console port