Quick Setup Bridge Information; Sample Identification Information - 3Com OfficeConnect Remote 812 Cli User's Manual

4-6 C 4: Q S
HAPTER UICK ETUP

Quick Setup Bridge Information

The network name is used by the OCR 812 to identify your bridging setup.
Question
Enter the network name:
The spanning tree algorithm is used to eliminate loops in a network that is linked
together with bridges.
Question
Do you want to run the spanning tree algorithm?
Would you like to review your current settings before executing [yes]?

Sample Identification Information

This section contains a sample of possible settings.
Management Information:
Console Login Required:
Console Login Password:
SNMP Management:
SNMP Community:
SNMP IP Address:
SNMP Read&Write:
TELNET Management:
TELNET User:
TELNET Password:
IP Information:
IP Network Name:
IP Network Address:
IP Mask:
IP Frame Type:
IP RIP:
DHCP Server:
DHCP Pool Start IP Address:
DHCP Pool End IP Address:
TFTP Server Information:
TFTP Access:
IPX Information:
IPX Network Name:
IPX Network Number:
IPX Frame Type:
Bridge Information:
Bridge Network Name:
Spanning Tree:
Do you want to change any answers [no]?
Do you want to actually execute these commands [yes]?
Default Your System
[bridge]
Default
[no]
yes
password
public
0.0.0.0
yes
root
!root
ip
192.168.200.254
C
ethernet_ii
v2
Enabled
192.168.200.1
192.168.200.40
Any system
ipx
12345661
ethernet_ii
bridge
no
System