Quick Setup Bridge Information; Sample Identification Information - 3Com OfficeConnect 3CP4144 Cli User's Manual

Question
Enter the name of your network:
The network number is a non-zero hexadecimal number of up to 8 digits.
Question
Enter the ipx network number:
You need to specify the framing for the IPX network. It should be one of the
following: "ethernet_ii", "snap", "dsap", "novell_8023."
Question
What is the framing for the IPX network ?

Quick Setup Bridge Information

The network name is used by the OfficeConnect Remote 812 to identify your
bridging setup.
Question
Enter the network name:
The spanning tree algorithm is used to eliminate loops in a network that is linked
together with bridges. You should run the spanning tree algorithm in the
OfficeConnect Remote 812 if you have multiple 812s linking your network to
another network; or if you think that there might be loops in your network.
Question
Do you want to run the spanning tree algorithm?
Would you like to review your current settings before executing [yes]?

Sample Identification Information

This section contains a sample of possible settings.
CLI Quick Setup Script
Default Your System
[ipx]
Default System
[ ]
Default System
[ethernet_ii]
Default Your System
[bridge]
Default
[no]
4-5
System