1St Gear One-Way Clutch Inspection; 1St Clutch Hub Replacement - Honda 2004 Odyssey Service Manual

Shafts and Clutches

1st Gear One-way Clutch Inspection

1. Hold the 1st-hold clutch hub (A), and turn the 1st
gear (B) in the direction shown to be sure it turns
freely. Also make sure the 1st gear does not turn in
the opposite direction.
C
2. If any problem occurs on the 1st gear one-way
clutch, replace the 1st clutch hub (C). The 1st gear
one-way clutch is not available separately from the
1st clutch hub.
14-452 14-452
A
B

1st Clutch Hub Replacement

Special Tools Required
• Driver 07749-0010000
• Driver attachment 07947-6340500
• Attachment, 78 x 90 mm 07GAD-SD40101
1. Remove the 1st-hold clutch hub (A) from the 1st
gear (B) with the special tools and a press.
B
C
2. Remove the 1st clutch hub (C) from the 1st gear,
then install the new 1st clutch hub in the 1st gear.
3. Install the 1st-hold clutch hub (A) in the 1st gear (B)
with the special tools and a press.
07GAD-SD40101
B
07749-0010000
07947-6340500
A
07749-0010000
A