Setting The Measurements - Agilent Technologies WireScope 350 User Manual

@‘ƒr…‡ÃH‚qrÃs‚…Ã8‚ƒƒr…ÃUr†‡vt
UurÃ@‘ƒr…‡Ã6ˆ‡‚‡r†‡ÃTr‡ˆƒ

Setting the Measurements

6−14
1 On the Autotest Setup screen, press Cable Pairing, then press Edit.
The Cable Pairing Setup screen displays.
Press the cable pairing convention used on the job, then press OK. The
Autotest Setup screen displays, with the cable pairing convention
named.
In Expert Mode, you have the ability to specify in detail what
measurements are used to determine the certification status of your test.
In addition, there are choices for optional features.
1 In Expert Mode, press Autotest on the Main menu.
2 On the Autotest Setup screen press Edit Settings. On the Autotest
Settings screen press Measurements. The first Measurements Setup
screen identifies the required measurements for the limits you have
selected. It is possible to disable the measurements, but it is not
recommended. Press Next to view the optional measurements you
may want to add to your test. Add them by pressing the name or box.