B, 08-156B Bypass Tray Registration Jam Rap (65-87 Ppm) - Xerox WorkCentre 5687 Series Service Manual

Table of Contents

Advertisement

Figure 3 Circuit diagram
WorkCentre 5687 Family
08-155B, 08-156B Bypass Tray Registration Jam RAP (65-
87 ppm)
08-155 The lead edge of the paper failed to actuate the registration sensor within the correct
time after start of feed from the bypass tray.
08-156 The IOT detects that a sheet fed from the bypass has arrived to early at the registration
sensor.
Initial Actions
Make sure that the correct RAP is used. To identify the correct RAP to use, go to the 08-
155, 08-156 Bypass Tray Registration Jam Entry RAP.
Check the condition of the paper in the bypass tray. Refer to IQ1 and GP 20.
Check for obstructions in the paper path.
Check that the left hand door is latched correctly.
Check that the interlock cover has not come loose, PL 7.30 Item 23. Bias the cover to the
right and tighten the two screws
Check that the short paper path assembly latches without excessive force, PL 10.25 Item
1. Go to REP 10.1. In Replacement Step 5, check the latch mechanism.
If 08-155 is displayed, check the bypass tray empty actuator, 07C Bypass Tray RAP.
Procedure
NOTE: The front door interlock must be cheated when checking +24V components.
Enter dC330 code 08-150 registration sensor, Q08-150. Press Start. Figure 2. Activate the reg-
istration sensor. The display changes.
Y
N
Go to Flag 1. Check Q08-150. Refer to:
GP 11 How to Check a Sensor.
P/J16, IOT PWB.
01E +5V Distribution RAP.
01B 0V Distribution RAP.
Install new components as necessary:
Registration sensor, (65-87 ppm) PL 8.17 Item 3.
Perform OF7 IOT PWB Diagnostics RAP before a new IOT PWB is installed, PL
1.10 Item 2.
Enter dC330 code 04-010 main drive motor, code 08-070 registration clutch, CL08-070. Press
Start. The jam clearance knob, 4c, PL 8.17 Item 10, rotates.
Y
N
Go to Flag 3. Check CL08-070. Refer to:
GP 12 How to Check a Solenoid or Clutch.
P/J5, IOT PWB.
P/J17 LVPS.
Fuse, PL 1.10 Item 9, GP 7.
Enter dC330 code 08-050 feed solenoid, SOL08-050. Press Start. The solenoid energizes.
August 2007
2-219
Status Indicator RAPs
08-155A, 08-156A, 08-155B, 08-156B

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wc5632fWc5545fWc5675fWc5645fWc5687fWc5655f

Table of Contents