Suzuki Baleno Manual page 1366

6-2-18 ENGINE GENERAL INFORMATION AND DIAGNOSIS (J18 ENGINE WITH WU TWC)
FAIL-SAFE TABLE
When any of the following DTCs is detected, ECM enters fail-safe mode as long as malfunction continues to exist
but that mode is canceled when ECM detects normal condition after that.
DTC NO.
Mass air flow circuit low input
P0100 P0100
Mass air flow circuit high input
Intake air temp. circuit low input
P0110 P0110
Intake air temp. circuit high input
Engine coolant temp. circuit low input
P0115 P0115
Engine coolant temp. circuit high input
Throttle position circuit low input
P0120 P0120
Throttle position circuit high input
P0500 Vehicle speed sensor malfunction
DETECTED ITEM FAIL-SAFE OPERATION
D ECM controls injector drive time (fuel injection vol-
ume) according to throttle valve opening (closed
) g
throttle position or not).
D ECM stops EGR control.
D ECM controls actuators assuming that intake air
temperature is 40_C (104_F). temperature is 40_C (104_F)
D ECM stops EGR control.
D ECM controls actuators assuming that engine
coolant temperature is 80_C (176_F).
D ECM stops EGR control.
D ECM operates radiator fan.
D ECM controls actuators assuming that throttle
opening is about 12_. opening is about 12_
D ECM stops EGR control.
ECM controls actuators assuming vehicle speed is
10 km/h (6 mile/h).
g (
( )