Clear Ip Ospf Statistics - Dell Force10 S4810P Reference Manual

pre-Version
6.1.1.1

clear ip ospf statistics

Clear the packet statistics in interfaces and neighbors.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax clear ip ospf process-id statistics [interface name {neighbor
router-id}]
Parameters
process-id
interface
neighbor
id
Defaults none
Command Modes EXEC Privilege
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Introduced on the E-Series.
Enter the OSPF Process ID to clear a specific process. If no Process
ID is entered, all OSPF processes are cleared.
name
(OPTIONAL) Enter the keyword interface followed by one of the
following interface keywords and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For Port Channel groups, enter the keywords port-
channel followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale.
• For a SONET interface, enter the keyword sonet followed by
the slot/ port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
• For a VLAN, enter the keyword vlan followed by a number
from 1 to 4094.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
router-
(OPTIONAL) Enter the keyword neighbor followed by the
neighbor's router-id in dotted decimal format (A.B.C.D.).
Introduced on the Z9000.
Introduced on the S4810.
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
1149